Posted on

Moosend for WordPress: Connect Contact Form 7 to Moosend

Moosend for WordPress usually means one thing, namely getting the people who fill in your website forms into Moosend, without copying them by hand. This guide shows how to connect Contact Form 7 to Moosend with ChimpMatic, so every form submission reaches the Moosend email list you choose, with the fields you map.

It covers the setup with the free Lite plugin, where to find your API key, how to map fields, how confirmation and consent work in Moosend, and how to start Moosend automations from a form. Then it closes with fixes for the problems people meet most often.

Short answer. For Moosend for WordPress, install ChimpMatic Lite, open your form’s Contact Form 7 Extension tab, choose Moosend, paste your API key, pick a email list, map the email field and save.

Last updated: November 2026

Why use Moosend for WordPress forms

Most WordPress sites collect email addresses through forms, such as a newsletter box, a contact form, a quote request or a download. Without a connection, those addresses sit in your inbox, and someone has to copy them into Moosend. That is slow, and people get missed.

Once the form talks to Moosend directly, every new subscriber arrives within seconds, with their name and details in the right fields. In addition, the consent checkbox decides who joins, so your email list only holds people who asked to hear from you. And because each form has its own settings, a newsletter form and a quote form can feed different email lists.

It adds new subscribers to email lists, and at the same time it leaves everyone already on a list untouched.

It also keeps things simple for your visitors. They fill in one form on your own site, and that is all. There is no second signup box and no trip to a hosted Moosend page, so the form keeps your site’s look. Meanwhile, the whole setup takes about five minutes and needs no code.

Which WordPress forms to connect to Moosend

  • Newsletter signup. The obvious one. People asked to join, so send them straight to your main email list.
  • Download or lead magnet. Someone trades an email for a guide or checklist. Give the form its own email list, so the right follow-up starts.
  • Quote or demo request. These are warm leads. A separate email list keeps them apart from newsletter readers, and a consent box keeps it honest.
  • Contact form. Here a message is not a signup. Therefore, add a consent checkbox, so only people who tick it reach Moosend.
  • Event or webinar registration. A dedicated email list makes reminders and follow-ups easy, because you can email exactly those people.

In short, every form that collects an email address can feed Moosend. The question for each one is simply which email list it should join, and whether it needs a consent checkbox.

What you need for Moosend for WordPress

  • A WordPress site where you can install plugins.
  • Contact Form 7 installed, with a form that already sends its notification email.
  • A Moosend account with at least one email list.
  • ChimpMatic Lite, free on WordPress.org.

Moosend uses its own words for a few things, so this guide does too. It calls the list a email list, each stored person a subscriber, and each stored detail a custom field.

How to set up Moosend for WordPress, step by step

Follow the steps in order. Each one is small, but together they decide whether your email list fills with complete subscribers or bare email addresses.

Moosend for WordPress: connect Contact Form 7 to Moosend with ChimpMatic

Step 1: Install ChimpMatic Lite

First, install the free ChimpMatic Lite plugin from WordPress.org and activate it. Contact Form 7 must already be active, because ChimpMatic adds Moosend to the forms you already have.

Step 2: Check that your form already works

Next, open your form under Contact → Contact Forms and send yourself a test. The notification email should arrive, since ChimpMatic adds the signup on top of it and never replaces it.

Step 3: Open the Contact Form 7 Extension tab

Then open the Contact Form 7 Extension tab in the form editor and choose Moosend. Every form has its own tab, so each one keeps its own Moosend settings.

Step 4: Paste your Moosend API key

After that, paste your API key and connect. Your email lists load at once. The section below shows where the key lives in Moosend.

Step 5: Pick the email list

Now choose the email list that new subscribers should join. If your account has several, compare the names carefully, because a working connection to the wrong email list is the most common mistake.

Step 6: Map the fields, save and test

Finally, map the email field and the name, save the form, and send a test from an inbox you control. Then open the email list in Moosend and check the new subscriber.

If you run several forms, give each a clear name such as “Newsletter” or “Quote request”. Later, it then shows at a glance which form feeds which email list.

Test the connection before you rely on it

  1. First, submit the form from an inbox you control, not a made-up address.
  2. Then open the email list in Moosend and find the new subscriber. Check that the name and every mapped field arrived.
  3. If confirmation is on, click the link in the confirmation email, and check the subscriber again.
  4. Finally, submit the form once more from the same address, and see what Moosend does with a returning subscriber.

That last check tells you how Moosend treats people who sign up twice. If the address is already on the email list, then Moosend keeps that subscriber unchanged on purpose. Knowing this up front saves confusion later, when someone fills in two of your forms.

Find your Moosend API key

  1. First, log in to Moosend, click More in the menu bar, then Settings.
  2. Next, in the menu on the left, click API key.
  3. Finally, click Copy, or Generate API key if you need a new one.

Moosend’s own help covers this step too, in Moosend’s user guide. Treat the key like a password, because anyone who has it can manage your subscribers. For that reason, ChimpMatic encrypts it before saving and never shows it again.

If the key stops working later, for example after someone regenerates it, the form keeps sending its emails but no new subscribers reach Moosend. So whenever you replace the key in Moosend, paste the new one into the form’s tab as well.

Field mapping for Moosend for WordPress

Field mapping tells ChimpMatic which answer goes into which Moosend field. Contact Form 7 names each answer with a mail-tag such as [your-email] or [your-name]. Moosend keeps the name on the subscriber, and it stores every other detail in the email list’s custom fields. So mapping is simply matching one to the other.

Form field Typical mail-tag Where it goes in Moosend
Email [your-email] The email address (required)
Name [your-name] The name custom field
Company or phone [your-company] A custom field you create in Moosend first
Consent checkbox [acceptance your-consent] Decides whether the subscriber is sent at all

The email address is required, and ChimpMatic Lite also sends any three fields you choose. Pro has no field limit of its own, so a long form arrives complete and only your Moosend email list sets the limit. Either way, an unmapped field is not sent, which is why a email list sometimes fills with bare email addresses. Therefore, map the name at least.

Keep the types matched as well. A date field in Moosend needs a date in the form, and a number field needs a number, or Moosend may reject the value. Also, if you rename a mail-tag in the form, update the mapping, because the old mapping points at a tag that no longer exists. The field mapping guide covers every case.

Only new subscribers are added

ChimpMatic adds new subscribers to the email list you pick. However, someone already on the list is left exactly as they are, so their fields and their subscription choices are never changed by a form. For the details, see Moosend, and the double opt-in guide explains when confirmation is worth it.

A message is not permission

A contact message is not permission to send marketing. Therefore, if the form is not a signup form, add a checkbox or acceptance field, and ChimpMatic sends people to Moosend only when it is ticked. This matters most for visitors in the EU, where you need proof that someone agreed. It works the same way for every form and every email list, in the free plugin too.

Keep your Moosend email list clean

A clean email list costs less and reaches more inboxes, because most platforms charge by the number of subscribers and judge senders by how many emails bounce. So three habits pay off. First, collect consent, so everyone on the email list expects your emails. Second, map at least the name, so emails can greet people properly. Third, keep bots out, as the next paragraph explains.

Spam protection is that third habit. A public form will happily sync bot entries into your email list, which inflates your subscriber count. So add a CAPTCHA or honeypot to the form before you connect it.

Start Moosend automations from WordPress forms

Once subscribers arrive in Moosend, the next step is to email them automatically. Moosend calls these automations. The simplest trigger is the email list itself. Build one that starts when someone joins the email list your form feeds, and every new subscriber from that form enters it.

  1. In Moosend, create a new automation and choose “joins a email list”, or the closest trigger Moosend offers, as its starting point.
  2. Next, pick the same email list your form feeds.
  3. Then add the first email, for example a welcome or the download the form promised.
  4. After that, add any delays and further emails.
  5. Finally, switch it on and send the form once from an inbox you control.

Because each form can feed its own email list, you can give each form its own sequence. For example, a newsletter form joins one email list and gets a welcome series, while a quote form joins another and gets a sales follow-up. With Pro, one form can also send people to several email lists at once, so a single signup can start more than one sequence.

Good first sequences are short and specific.

  • Welcome. One or two emails that say what people will get from you, sent right after they join.
  • Delivery. The download, coupon or checklist the form promised, sent at once.
  • Follow-up. For quote and demo forms, a short note within a day, then a reminder a few days later.
  • Reminders. For events, a reminder before the start and the recording afterwards.

If confirmation is on, the sequence starts only after the subscriber confirms. So when you test, click the confirmation link first, then wait for the first email.

ChimpMatic Lite and Pro for Moosend for WordPress

Feature Lite (free) Pro
Email lists per form One Several at once
Fields sent Email plus any three Unlimited
Consent checkbox Yes Yes
Confirmation New subscribers only New subscribers only
Connect any number of forms Yes Yes
Priority support No Yes

For most sites, Lite covers the job, with one email list per form, the email plus three fields, and consent. Pro is for sites that segment, with several email lists per form and every field mapped. See everything the integration does on the Contact Form 7 Moosend integration page, or compare plans and pricing.

Troubleshooting Moosend for WordPress

Almost every problem is a setting. So start by turning on the Debug Logger in the plugin’s advanced settings, send a test, and read Moosend’s exact answer in the log.

Problem Likely cause Fix
An entry is marked as not sent The address was already on the list Nothing to fix, because ChimpMatic leaves that subscriber alone on purpose
Custom fields arrive empty The form fields are not mapped to custom fields Map them, and then test with a new address
A subscriber shows as unconfirmed The email list uses double opt-in in Moosend Nothing to fix, since they join after clicking the confirmation link
The email lists do not load The API key was copied incompletely or regenerated Copy the current key, and then paste it again

Two causes are behind most of the remaining questions. The first is an unmapped field, which the field mapping guide fixes. The second is confirmation, since a subscriber who has not confirmed yet looks missing until they click the link. Finally, if the form marks an entry as spam, that entry never reaches Moosend, so check your spam filter when real entries go missing.

Moving from Mailchimp to Moosend for WordPress

Many sites that use Moosend started on Mailchimp. With ChimpMatic, the move does not have to happen all at once, because each form picks its own platform. For example, you can switch the newsletter form to Moosend today and leave the quote form on Mailchimp until its follow-up sequence is rebuilt.

  1. First, export your Mailchimp audience and import it into a Moosend email list, so existing subscribers come along.
  2. Next, rebuild your welcome email and any sequences as Moosend automations.
  3. Then open one form’s Contact Form 7 Extension tab, choose Moosend, paste your API key and pick the new email list.
  4. After that, send a test and check the new contact on both sides.
  5. Finally, repeat for the next form when you are ready.

Because the plugin stays the same, your forms, field mappings and consent checkboxes keep working through the move. Only the destination changes, one form at a time.

Moosend for WordPress: FAQ

How do I connect Moosend to WordPress forms?

Install ChimpMatic Lite, open a Contact Form 7 form’s Contact Form 7 Extension tab, choose Moosend, paste your API key and pick a email list. From then on, every submission of that form reaches Moosend.

Is Moosend for WordPress free with ChimpMatic?

Yes. ChimpMatic Lite is free on WordPress.org and connects as many forms as you have. Pro adds several email lists per form and unlimited mapped fields.

Do I need Moosend’s own WordPress plugin as well?

No, not for your forms. ChimpMatic talks to Moosend’s API directly, so your Contact Form 7 forms need nothing else.

Where do I find my Moosend API key?

In short, First, log in to Moosend, click More in the menu bar, then Settings. Next, in the menu on the left, click API key. Finally, click Copy, or Generate API key if you need a new one.

Can different WordPress forms feed different Moosend email lists?

Yes, because each form has its own tab with its own email list, fields and consent rule. As a result, one site can feed several email lists.

What happens if someone is already on the email list?

If the address is already on the email list, then Moosend keeps that subscriber unchanged on purpose.

How does confirmation work with Moosend?

ChimpMatic adds new subscribers to the email list you pick. However, someone already on the list is left exactly as they are, so their fields and their subscription choices are never changed by a form.

How many fields can I send?

ChimpMatic Lite sends the email plus any three fields you choose. Pro has no limit of its own, so every custom field your Moosend email list has can be filled.

Can I start Moosend automations from a WordPress form?

Yes. Build one that starts when someone joins the email list your form feeds, and every new subscriber from the form enters it.

What if I rename the email list in Moosend?

Nothing breaks. ChimpMatic remembers the email list itself, not its name, so the form keeps sending people to the same email list under its new name.

Does it work with an acceptance field?

Yes. Map Contact Form 7’s acceptance field as the consent field, and ChimpMatic sends people to Moosend only when it is ticked.

Will my form still send its notification emails?

Yes. ChimpMatic adds the signup and changes nothing else, so your form’s emails go out as before.

Can I use Moosend and Mailchimp on the same site?

Yes. Each form picks its own platform, so one form can feed Moosend while another still feeds Mailchimp. That makes a gradual move between platforms simple.

Where does my data go?

The email address, the fields you mapped and the consent choice go to Moosend. In addition, the external services page lists every service the plugin connects to and what is shared.

Next steps with Moosend for WordPress